bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about International Trucks


  • Bolt Hole to Use on Lower Bracket of RAS System for 2020 Ford F-150
  • I checked with RoadActive and when installing the # RAS3611-YHD the bolt hole to use on the lower bracket that fits under the spring is the second one from the very end.
    view full answer...

  • Replacement Pipe Mount to Use with Pro Series Jack # PS1401080303
  • For additional pipe mounts to use with the Pro Series trailer jack # PS1401080303 that you referenced you'd want the # BD015273. This is 1-7/8 inch long and 2-1/2 inch diameter.
    view full answer...

  • Horizontal Width of Angled Portion of Brophy Tie Down HSWB
  • On the Brophy Clamp On Camper Tie Down part # HSWB the horizontal distance from the beginning of the angled portion of the tie down to the end is 6 inches.
    view full answer...

  • Reese Steadi Flex Spring Bar # RP58501 Dimensions
  • I checked with Reese and for the Replacement Spring Bar part # RP58501 the dimensions are: Length 36” Width and Height of square end 1-1/8” Hole diameter 1/2” Hole location from end of bar to center of hole 1”
    view full answer...

  • Air Bag Kit Recommendation for 2020 Ford F-250 with Overload Springs
  • The Firestone Ride Rite kit part # F35FV is a confirmed fit for your 2020 Ford F-250 Super Duty with factory overload springs and is the best option overall as we've found that Firestone air bags are the highest quality. For a compressor kit then the heavy duty part # F2097 will work great to make inflating the bags and maintaining them easier. The compressor will inflate faster than standard compressors and the gauge inside the vehicle will allow you to monitor and inflate them from inside...
    view full answer...

  • Availability of 30 inch Furrion RV Fireplace FF30SC15ABL
  • Yes, we do have the Furrion Electric RV Fireplace with Crystals - 30" Wide - Recessed Mount - Black Item # FF30SC15ABL that you are looking for and it is available.
    view full answer...

  • B and W Gooseneck Hitch/Fifth Wheel Rail Kit for 2008 Dodge Ram 3500
  • B and W has the Turnoverball rail kit part # BWGNRK1308 which is a fit for your 2008 Dodge Ram 3500 which doubles as a fifth wheel rail kit with the Companion # BWRVK3400 which is a slider like you'd need since you have a short bed truck. There wouldn't be a way to adapt what you have to the new truck.
    view full answer...

  • Is it Okay to Just Replace Bearing in Trailer Hub without Race
  • If the race is fine you are totally okay to just replace the bearings. In most situations just replacing the bearing is all that's needed.
    view full answer...

  • Does Install of Wheelmaster Inflation Kit on Inner Wheel Require Outer Wheel Removal
  • It's going to be much easier to install the Wheelmasters # WM8004 on the inner wheel if you remove the outer wheel but if you had larger hand holes and maybe longer arms I could see it being possible. When we installed it we pulled off the outer wheel though.
    view full answer...

  • Can Two MaxxFan Dome Roof Vent Be Ran Off Single Switch
  • Yes you could run two of the MaxxFan Dome Roof Vent w/ 12V Fan # MA00-03812B off of the same circuit to then be controlled with a single switch like # D16740.
    view full answer...

  • Tow Bar Lighting Kit Recommendation for 2020 Ford Expedition
  • We don't have a tow bar wiring setup that fits your 2020 Ford Expedition that is plug and play but we do have great diode kit solutions like the Roadmaster part # RM-15247 which installs by splicing inline with the taillight circuits of your vehicle.
    view full answer...

  • Comparing Phone Display and Monitor Display RVS Backup Camera Setups
  • There are certainly pros and cons of the two Rear View Safety WiFi backup camera setups that you are interested in. The one that uses the phone display like part # RVS-83112-WiFi cost a little less since there's not monitor buy and there's less clutter possibly on the interior of your vehicle. Plus nothing would occupy your cigarette lighter port. The other option part # RVS-83112 might be better if you find yourself using your phone a lot since it comes with a display. Or if you didn't...
    view full answer...

  • Replacement Axle for Lippert 5200 that is 86.5 inches Long
  • From your axle tag I can tell you have a 5,200 lb trailer axle that has 86.5 inches from hub face to hub face, 68.5 inches from spring seat center to spring seat center and comes with hubs that have a 6 on 5-1/2 inch bolt pattern. While we have axles like the part # 8327816-EB that are the right length, capacity, and come with correct bolt pattern hubs the spring seats aren't lined up perfectly so they would need to be moved. You could just have new spring seats welded on with part # TRSS300.
    view full answer...

  • Roof Rack For 2020 Ford Escape With Naked Roof
  • While some vehicles have removable covers for crossbar mounts, the rubber strips you are seeing on your 2020 Ford Escape are just roof seals and do not have anything to do with the crossbars. Since you have a naked roof and do not have factory side rails, you will want to go with a roof rack that attaches to the door jam. I recommend looking into Rhino-Rack which is the most budget-friendly option and also my favorite option due to and it's durability. The correct parts for your '20 Escape...
    view full answer...

  • How To Jump Start Battery Using Redarc In-Vehicle BCDC Battery Charger
  • The Redarc In-Vehicle BCDC Battery Charger part # 331-BCDC1240D is a great option for charging a trailer battery. It sounds like you are concerned with the status of the starter battery and if that is case there is no need to worry as there are built-in safeguards to prevent puling power from the start battery when it gets below a certain voltage. If for some reason the start battery does die, you can use the auxiliary battery to jump start this with the Redarc Smart Start Battery Isolator...
    view full answer...

  • Recommended Bike Cover On A Hitch-Mounted Bike Rack
  • The Swagman Bike Cover for RVs - Large - 2 Bikes # S24FR is the only bike cover available at this time. You wouldn't want to fold this in half to use for 1 bike, but you could certainly use it in the normal fashion with just one bike. You just may run into the issue where you have some excess cover that could move around on the highway. Straps are included to keep the bag cover nice and tight, however, to be extra sure that everything is tight and secured you could add SmartStraps Bungee...
    view full answer...

  • Do I Need a Hitch Reducer Sleeve for the Swagman XTC-2 or XC-2 For a 2" Hitch
  • Good news! The Swagman XTC-2 # S64670 and XC-2 # S64650 can both be used on either 1-1/4" and 2" hitches with the included shank adapter, which will help make sure the shank fits tightly in your 2" hitch. If for whatever reason you ever needed a hitch reducer you could use the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02 to bring a 2" receiver down to a 1-1/4" receiver. I've linked some review videos of these parts for you to check out.
    view full answer...

  • Determining Towing Capacity of Vehicle and Hitch if Vehicle is Rated Lower
  • In any towing setup you are only as strong as your weakest component. So for your 2020 Honda Pilot that would be the vehicle that is rated for 5,000 lbs and not a higher rated hitch like the Curt part # C13146.
    view full answer...

  • Does the AirLift WirelessAIR Use Cell Service Signal?
  • The Air Lift WirelessAIR Compressor System for Air Helper Springs # AL74000EZ uses Bluetooth to connect to the Air Lift LoadLifter 5000 Springs # AL88299. The antenna symbol you see on the screen indicates connection status or Bluetooth signal strength and not cell service strength. Note that the system # AL88299 can only connect to one wireless controller at a time, whether it's your remote or the mobile app and will take about 30 seconds after disconnecting from one to pair with the other.
    view full answer...

  • Can the Kuat Sherpa 2.0 Fit with the 2021 Toyota Camry
  • I have a solution for you, but an adapter will not solve the underlying problem with fitting the Kuat Sherpa 2.0, part # SH22G, to your 2021 Toyota Camry. It looks like the highest class hitch for your vehicle is a Class II, and the Sherpa 2.0 needs at least a Class III. The best thing I can recommend is getting a new bike rack. The Swagman Chinook, part # S64683, is compatible with 1-1/4" receivers and can handle 2 bikes at 45 pounds each. It utilizes a frame-mount. I've linked to a...
    view full answer...